2013年11月19日星期二

Configuring ARP Detection on Huawei ME60



Address Resolution Protocol ME60-X3 (ARP)  probe enables faster protection switching by detecting status of end-to-end links. ARP detection can be configured for a network scenario in which a link protection group is configured for the upstream Ethernet ports on the access device, and there are other types of devices deployed, such as switches and transmission devices, between the access device and the aggregation devices.

Prerequisites
The access device provides upstream ports through the upstream boards. ARP detection is not supported if the access device provides upstream ports through the control board.

//Configure the VLAN and Layer 3 interface IP address used for ARP detection of the local device.
huawei(config)#vlan 20 smart
huawei(config)#port vlan 20 0/19 0
huawei(config)#interface vlanif 20
huawei(config-if-vlanif20)#ip address 1.1.1.2 24
huawei(config-if-vlanif20)#ip address 2.2.2.2 24 sub
huawei(config-if-vlanif20)#quit
//Configure ARP detection for the working port.
huawei(config)#arp-detect arp_test1 bind peer-ip 1.1.1.1 vlan 20 port 0/19/0
huawei(config-arp-detect-arp_test1)# detect-multiplier 3
huawei(config-arp-detect-arp_test1)# min-tx-interval 2
huawei(config-arp-detect-arp_test1)#detect enable
huawei(config-arp-detect-arp_test1)#quit
//Configure ARP detection for the protection port.
huawei(config)#arp-detect arp_test2 bind peer-ip 2.2.2.1 vlan 20 port 0/19/1
huawei(config-arp-detect-arp_test2)#detect-multiplier 3
huawei(config-arp-detect-arp_test2)#min-tx-interval 2
huawei(config-arp-detect-arp_test2)#detect enable
huawei(config-arp-detect-arp_test2)#quit
//Query configurations of the working port.
huawei(config)#display arp-detect arp_test1                                   
 ---------------------------------------------------------------------------   
  Name       : arp-test2                          Admin State : Enable        
  Peerip     : 1.1.1.1                             Interval    : 2(s)          
  Vlan       : 20                                  Multiplier  : 3             
  F/S/P      : 0/19/0                              State       : Down          
 --------------------------------------------------------------------------- 
//Query configurations of the protection port.
huawei(config)#display arp-detect arp_test2                                   
 ---------------------------------------------------------------------------   
  Name       : arp_test2                          Admin State : Enable        
  Peerip     : 2.2.2.1                             Interval    : 2(s)          
  Vlan       : 20                                  Multiplier  : 3             
  F/S/P      : 0/19/1                              State       : Down          
 ---------------------------------------------------------------------------   


For more Huawei information please click here   
http://www.huanetwork.com/huawei-router-me60-series-price_c90

2013年11月18日星期一

Huawei S5300 Configuring FTP

Before the upgrade,LS-S5324TP-SI-AC you must start the FTP server, which is provided by the DC. FTP configurations include the FTP server address and file transfer service.
Step 1     Choose System > FTP Settings.
The FTP Settings dialog box is displayed.
Step 2     In the FTP Settings dialog box, click the System Information tab and set the server address, and then click OK.
In this example, the server address is 192.168.1.40.
Step 3     Click the File Transfer Service Setting tab and set File Transfer Service Root Directory and parameters in the File Transfer Service Configuration area. Set the user name and password of the FTP service, and then test the protocol connection. In this example, select the FTP protocol, and then click Test FTP to test the protocol connection.
The system displays "Operation Succeeded", indicating that the FTP connection is normal.
Step 4     Choose System > FTP Server Configuration.
The FTP server config dialog box is displayed.
Step 5     Set the FTP parameters, and then click Start to start the FTP server.
The default user name is ftpuser and password is Changeme_123.
To change the user name, password, port, or directory, first change the parameter settings in the FTP server config dialog box and click Start, and then change the parameter settings in the FTP Settings dialog box. If you use a third-party FTP or SFTP server, enter the user name and password configured on the third-party server in the FTP Settings dialog box, and then click Test FTP or Test SFTP.

For more Huawei information please click here
http://www.huanetwork.com/huawei-ls-s5328c-ei-24s-price_p498.html


2013年11月13日星期三

How to configure the MTU of an Ethernet Interface on Huawei ME60 Router?

The Huawei ME60-X3 Multi-Service Control Gateway (MSCG) series products are characterized as the best BRAS in industry.

Step 1:
system-view
The system view is displayed.
Step 2:
interface { ethernet | gigabitethernet } interface-number
The Ethernet interface view is displayed.
Step 3:
mtu mtu
TheIPv4 MTU of the Ethernet interface is configured.
Step 4:
system-view
The system view is displayed.
Step 5:
interface { ethernet | gigabitethernet } interface-number
The Ethernet interface view is displayed.
Step 6:
ipv6 enable
The IPv6 is enabled in this interface.
Step 7:
ipv6 mtu mtu
The IPv6 MTU of the Ethernet interface is configured.


For more Huawei AR3260 information please click here

2013年11月6日星期三

How to configure an Interface Address Pool on Huawei S2300 switch?

uawei Quidway Switch S2300, S2309TP-EI Mainframe (8 10/100 BASE-T ports and 1 Combo GE (10/100/1000 BASE-T+100/1000 Base-X) ports and AC 110/220V)

Step 1:
system-view
The system view is displayed.
Step 2:
dhcp enable
DHCP is enabled.
Step 3:
interface interface-type interface-number
The interface view is displayed.
Step 4:
ip address ip-address { mask | mask-length }
An IP address is assigned to the interface.
Step 5:
dhcp select interface
The device is configured to use an interface address pool.
Step 6:
dhcp server lease { day day [ hour hour [ minute minute ] ] | unlimited }
The IP address lease is set.
Step 7:
dhcp server excluded-ip-address start-ip-address [ end-ip-address ]
The IP addresses that cannot be automatically allocated in the interface address pool are configured.
Step 8:
dhcp server static-bind ip-address ip-address mac-address mac-address
An IP address in the interface address pool is statically bound to the MAC address of a DHCP client.


For more Huawei MA5680T information please click here

2013年11月5日星期二

How to configure an LDP Label Advertisement Mode on Huawei S2318TP Switch?

Huawei Quidway Switch S2300, S2318TP-SI Mainframe(16 10/100 BASE-T ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and AC 110/220V)

Step 1:
system-view
The system view is displayed.
Step 2:
interface interface-type interface-number
The interface view is displayed.displayed.
Step 3:
mpls ldp advertisement { dod | du }
A label advertisement mode is configured.
Step 4:
system-view
The system view is displayed.
Step 5:
mpls ldp remote-peer remote-peer-name
The remote MPLS LDP peer is created and the remote MPLS LDP peer view is displayed.
Step 6:
mpls ldp advertisement { dod | du }
A label advertisement mode is configured.


For more Huawei information please click here
http://www.huanetwork.com/gpon-epon-terminal-price_c42

2013年11月4日星期一

How to configure Remote MAC Address Mirroring on Huawei S3352P-SI Switch?

Huawei Quidway Switch S3300, S3352P-SI Mainframe(48 10/100 BASE-T ports and 2 100/1000 BASE-X ports and 2 SFP GE (1000 BASE-X) ports (SFP Req.) and AC 110/220V

Step 1:
system-view
The system view is displayed.
Step 2:
traffic behavior behavior-name
The traffic behavior view is displayed.
Step 3:
undo mirroring
The flow mirroring action is cancelled.
Step 4:
quit
Exit from the traffic behavior view.
Step 5:
interface interface-type interface-number
The interface view is displayed.
Step 6:
undo traffic-policy inbound
The traffic policy and flow mirroring action on the interface are canceled.


For more Huawei LS-S5348TP-PWR-SI information please click here

How to configure the Peer Mode on Huawei S2318TP Switch?

Huawei Quidway Switch S2300, S2318TP-EI Mainframe(16 10/100 BASE-T ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and AC 110/220V

The Quidway S2300 series switches are new generation Ethernet intelligent access switches. The S2300 is mainly deployed on the IP MAN and intranets, meeting requirements of carrying various Ethernet services and accessing the Ethernet. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP), the S2300 supports rich and flexible service features and thus improves the operability, manageability, and service expansibility. In addition, the S2300 supports powerful lightning protection, security features, ACLs, QinQ, 1:1 VLAN switching, and N:1 VLAN switching to flexibly deploy VLAN

Step 1:
system-view
The system view is displayed.
Step 2:
ntp-service source-interface vlanif vlan-id
The local source interface that receives the NTP packet is configured.
Step 3:
ntp-service unicast-server ip-address [ version number | authentication-keyid key-id | source-interface interface-type interface-number | preference ] *
The IP address of the NTP server is configured.
Step 4:
system-view
The system view is displayed.
Step 5:
ntp-service source-interface vlanif vlan-id
The local source interface that sends NTP packets is specified.

For more Huawei LS-S2318TP-EI-AC information please click here