How to configure an Interface Address Pool on Huawei S2300 switch?

uawei Quidway Switch S2300, S2309TP-EI Mainframe (8 10/100 BASE-T ports and 1 Combo GE (10/100/1000 BASE-T+100/1000 Base-X) ports and AC 110/220V)

Step 1:
system-view
The system view is displayed.
Step 2:
dhcp enable
DHCP is enabled.
Step 3:
interface interface-type interface-number
The interface view is displayed.
Step 4:
ip address ip-address { mask | mask-length }
An IP address is assigned to the interface.
Step 5:
dhcp select interface
The device is configured to use an interface address pool.
Step 6:
dhcp server lease { day day [ hour hour [ minute minute ] ] | unlimited }
The IP address lease is set.
Step 7:
dhcp server excluded-ip-address start-ip-address [ end-ip-address ]
The IP addresses that cannot be automatically allocated in the interface address pool are configured.
Step 8:
dhcp server static-bind ip-address ip-address mac-address mac-address
An IP address in the interface address pool is statically bound to the MAC address of a DHCP client.


For more Huawei MA5680T information please click here