Configuring the NE80E with 5000 W power consumption to Power on LPUF-40s/LPUI-40s

How to configure the NE40E-X3   with 5000 W power consumption to power on LPUF-40s/LPUI-40s.

Run:
system-view
The system view is displayed.
Run:
set board-power-on lower-performance-fan enable
The NE80E with 5000 W power consumption is configured to power on LPUF-40s/LPUI-40s.
Run:
system-view
The system view is displayed.
Run:
set power input-power power-value
The input power of the power module is configured.

NOTE:
This command can only be used on the NE80E with 5000 W power consumption, and does not need to be used on the NE40E-X8   with 8000 W power consumption.