Configuring the Broadcast Mode NTP

MA5600    uses the local clock as the master NTP clock on stratum 2 and works in the broadcast mode NTP, sends broadcast clock synchronization packets periodically through IP address 10.10.10.10/24 of the L3 interface of VLAN 2; MA5600_C functions as the NTP client, listens to the broadcast packets sent from the server through IP address 10.10.10.20/24 of the L3 interface of VLAN 2, and synchronizes with the clock on the broadcast server. To perform these configurations, do as follows:
On MA5600_S:
huawei(config)#ntp-service refclock-master 2
huawei(config)#vlan 2 standard
huawei(config)#port vlan 2 0/7 0
huawei(config)#interface vlanif 2
huawei(config-if-vlanif2)#ip address 10.10.10.10 24
huawei(config-if-vlanif2)#ntp-service broadcast-server
huawei(config-if-vlanif2)#quit
On MA5600_C:
huawei(config)#vlan 2 standard
huawei(config)#port vlan 2 0/7 0
huawei(config)#interface vlanif 2
huawei(config-if-vlanif2)#ip address 10.10.10.20 24
huawei(config-if-vlanif2)#ntp-service broadcast-client
huawei(config-if  MA5600T -vlanif2)#quit