2013年10月30日星期三

Huawei LS-S5328C-PWR-SI configuration

Quidway LS-S5328C-PWR-SI series gigabit switches are new generation Ethernet gigabit switches that meet the requirements for high-bandwidth access and Ethernet multi-service convergence, providing powerful Ethernet functions for operators and enterprise customers.

The S5300 supports automatic configuration, plug-and-play, deployment from USB devices, and batch remote
The S5300 supports the GARP Registration Protocol (GVRP). The GVRP technology implements dynamic
configuration of VLANs. In a complex networking environment, GVRP can simplify VLAN configuration and reduce network communication faults caused by incorrect configuration of VLANs. This reduces the manual
configurations of network administrators and ensures correct VLAN configurations.

10/100/1000Base-T ports and
four gigabit Combo ports, and
supports two 10GE XFP subcards,
four 1000Base-X SFP subcards,
two 10GE SFP+ subcards, and
four 10GE SFP+ subcards.
Supports dual pluggable power
supplies, AC power supplies, PoE
power supplies, and USB ports.


For more Huawei S5328C-SI information please click here

2013年10月29日星期二

How to configure the Queue Buffer on an Interface on Huawei S2300 switch?

The huawei ls-s2309tp-ei-ac series switches are new generation Ethernet intelligent access switches. 

Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
shutdown
The interface is shut down.
Step 4 Run:
qos queue queue-index max-length packet-number
The buffer size of the queue on the interface is set.
Step 5 Run:
undo shutdown
The interface is restarted.

NOTE:
Before modifying the queue length on an interface, run the shutdown command to shut down the interface, and then run the undo shutdown command to enable the interface; otherwise, the configuration does not take effect.



For more huawei S2309TP information please click here

2013年10月28日星期一

How to configure VLANs and configure interfaces on Huawei S3328TP-PWR-EI switch?

How to configure VLANs and configure interfaces on Huawei S3328TP-PWR-EI switch?

Huanetwork.com offers Huawei Quidway S3300 series switches, which are new generation Ethernet intelligent access switches. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP), the S3300 Quidway switch supports rich and flexible service features and thus improves the operability, manageability, and service expansibility, fully meeting the requirement of flexible networking.

# Create VLAN 10.

<HUAWEI> system-view
[HUAWEI] sysname Switch
[Switch] vlan batch 10
# Configure the type of GE0/0/1 and GE0/0/2 as trunk, and then add GE0/0/1 and GE0/0/2 to VLAN 10.

[Switch] interface gigabitethernet 0/0/1
[Switch-GigabitEthernet0/0/1] port link-type trunk
[Switch-GigabitEthernet0/0/1] port trunk allow-pass vlan 10
[Switch-GigabitEthernet0/0/1] quit
[Switch] interface gigabitethernet 0/0/2
[Switch-GigabitEthernet0/0/2] port link-type trunk
[Switch-GigabitEthernet0/0/2] port trunk allow-pass vlan 10
[Switch-GigabitEthernet0/0/2] quit
# Create VLANIF 10 and assign network segment address 10.10.10.1/24 to VLANIF 10.

[Switch] interface vlanif 10
[Switch-Vlanif10] ip address 10.10.10.1 255.255.255.0
[Switch-Vlanif10] quit

Assign IP address 10.10.10.2/24 to the interface connecting the router and Switch.

For more Huawei LS-S3352P-PWR-EI information please visit: www.huawei.com

2013年10月25日星期五

How to Configure Terminal Attributes on the VTY User Interface on Huawei?

Questions:
How to configure Terminal Attributes on the VTY User Interface on Huawei ME60-X8?

Answer:
Run:system-view,The system view is displayed.
Run:user-interface vty first-ui-number [ last-ui-number ],The VTY user interface view is displayed.
Run:shell,The VTY terminal service is enabled.
Run:idle-timeout minutes [ seconds ],The timeout disconnection function is set.
Run:screen-length screen-length [ temporary ],The number of lines displayed on the terminal screen is set.
Run:screen-width screen-length,The number of columns displayed on the terminal screen is set.
Run:history-command max-size size-value,The history command buffer is set.

NOTE:
This command is valid only for information displayed by the display interface description command.

For more Huawei ME60-X3 news about Price ans Specification, you can click here.