How to Configure the One-Way Transmission Delay Threshold on Huawei S9300?

Questions:
How to configure the OPFA One-Way Transmission Delay Threshold on Huawei Quidway S9300?

Answer:

Run:system-view,The system view is displayed.
Run:nqa test-instance admin-name test-name,The NQA view is displayed.
Run:threshold owd-sd owd-sd-value,The one-way transmission delay threshold (from the source to the destination) is configured.By default, no one-way transmission delay threshold is configured.
Run:threshold owd-ds owd-ds-value,The one-way transmission delay threshold (from the destination to the source) is configured.By default, no one-way transmission threshold is configured.

NOTE:
The one-way transmission delay threshold can be configured only when the test-type is set to jitter and ICMP Jitter tests.
You can perform either of 3 and 4 or both of them in any sequence.

For more Huawei Switch news GICF about Price ans Specification, you can click here.

How to Configure and Enabling a Smart Link Group on Huawei S5700?

Questions:
How to configure and Enabling GPBC a Smart Link Group on Huawei Quidway S5700?

Answer:

Run:system-view,The system view is displayed.
Run:smart-link group group-id,A Smart Link group is created and the Smart Link group view is displayed.The S5700 supports a maximum of 16 Smart Link groups.
Run:protected-vlan reference-instance { instance-id1 [ to instance-id2 ] }&<1-10>,An instance is bound to the Smart Link group as the protected instance. The functions of the Smart link group take effect only on the VLANs bound to the protected instance. For details about STP instance configuration, see Configuring and Activating an MST Region.

For more Huawei Switch news about Price ans MA5603T Specification, you can click here.

How to Configure an Accounting Scheme on Huawei S5700?

Questions:
How to configure an Accounting Huawei GPON Scheme on Huawei Quidway S5700?

Answer:

Run:system-view,The system view is displayed.
Run:aaa,The AAA view is displayed.
Run:accounting-scheme accounting-scheme-name,An accounting scheme is created and the accounting scheme view is displayed.By default, the S5700 provides an accounting scheme named default. This scheme can be modified but cannot be deleted.
Run:accounting-mode { hwtacacs | radius | none },The accounting mode is set.By default, the accounting mode is none.If the accounting mode is set to RADIUS or HWTACACS, you must configure the RADIUS or HWTACACS server template and apply the template to the corresponding user domain.
Run:accounting realtime interval,Interim accounting is enabled and the accounting interval is set.By default, interim accounting is disabled.The accounting interval depends on network situations. A short interval increases the traffic on the network and burdens the device that receive interim accounting packets. A long interval increases the errors of accounting when the communication between accounting server and the S5700 fails.
Run:accounting start-fail { online | offline },The policy for remote accounting-start failure is set.If accounting start fails when a user logs in, the S5700 processes the user according to the policy for accounting start failure.By default, the S5700 forbids a user to get online when accounting start fails.
Run:accounting interim-fail [ max-times times ] { online | offline },The policy for remote interim accounting-start failure is set.If the accounting fails after a user goes online, the S5700 processes the user according to the policy for interim accounting failure.By default, the policy for remote interim accounting-start failure is disabled.

For more Huawei Switch news about Price Huawei OLT ans Specification, you can click here.

How to Configure a Multicast Profile on Huawei S2700?

Questions:
How to configure a Multicast Huawei GPON Profile on Huawei Quidway S2700?

Answer:

Run:system-view,The system view is displayed.
Run:btv,The BTV view is displayed.
Run:multicast-profile profile-name,A multicast profile is created and the view of the multicast profile is displayed.
Run:add multicast-list { name list-name | index start-index to end-index } watch,A multicast group list is added to the multicast profile.By default, no multicast profile is configured on the S2700.
Run:max-program-num max-value,The maximum number is configured for multicast groups that users in the multicast profile can simultaneously join.

NOTE:
By default, users can watch a maximum of eight programs.

For more Huawei Switch news about Huawei EPON  Price ans Specification, you can click here.

How to Configure IGMP Message Suppression on Huawei S2700?

Questions:

How to configure IGMP Message Huawei OLT Suppression on Huawei Quidway S2700?

Answer:

Run:system-view,The system view is displayed.
Run:vlan vlan-id,The VLAN view is displayed.
Run:igmp-snooping report-suppress,IGMP message suppression is enabled.

NOTE:
When configuring IGMP message suppression, pay attention to the following points:
When IGMP message suppression is configured in a VLAN, IGMP cannot be enabled on the corresponding VLANIF interface.
The functions of IGMP snooping proxy and IGMP message suppression cannot be configured in the same VLAN.
The switch can suppress duplicate Membership Report messages even when IGMP message suppression is disabled. The default message suppression time is 10 seconds. To change the suppression time, run the igmp-snooping suppress-time suppress-time command. To disable IGMP message suppression, set the suppression time to 0.

For more Huawei Switch news Huawei ONT about Price ans Specification, you can click here.

How to Configure an IP Address Pool for a Stack on Huawei S2700?

Questions:
How to configure an IP Huawei Access Address Pool for a Stack on Huawei Quidway S2700?

Answer:

Run:system-view,The system view is displayed.
Run:stacking ip-pool start-ip-address ip-address-number [ mask ],An IP address pool is configured for a stack system.

NOTE:
An IP address pool cannot be configured with IP addresses on different network segments. For example, the start IP address in the address pool is 192.168.254.254 with a 24-bit mask. If the IP address pool holds 10 IP addresses, these IP addresses are on different network segments, and so cannot be assigned to the member switches in a stack. You need to pay attention to it when configuring an IP address pool for the stack system.
The network segment in the IP address pool cannot overlap IP addresses of other VLANIF interfaces.

For more Huawei Switch MA5600 news about Price ans Specification, you can click here.